Table of Contents
Advertisement
SL-85ERV4-R/85ERV4-RL
RTC Alarm Resume When Enabled, you can set the data and time at
Date (of Month) Set a certain date when RTC Alarm Resume
Resume Time (hh:mm:
IRQ Activity Monitoring
Choose "IRQ Activity Monitoring" in "IRQ/Event Activity Detect" and press
<Enter>. The following sub-screen will appear for IRQ Activity Monitoring
configuration:
Primary INTR
IRQ3 (COM 2 )
IRQ4 (COM 1 )
IRQ5 ( LPT 2 )
IRQ6 ( Floppy Disk )
IRQ7 ( LPT 1 )
IRQ8 ( RTC Alarm )
IRQ9 ( IRQ2 Redir )
IRQ10 ( Reserved )
IRQ11 ( Reserved )
IRQ12 (PS/2 Mouse )
IRQ13 ( Coprocessor )
IRQ14 ( Hard Disk )
IRQ15 (Reserved )
IRQ Activity Monitor-
which the RTC (Real Time Clock) alarm awakens
the system from suspend mode.
Choices: Disabled; Enabled
option is Enabled to awaken the system. This
option is concurrent with Resume Time option.
Set a certain time when RTC Alarm Resume
ss)
option is Enabled to awaken the system. This
option is concurrent with Date option.
Phoenix - AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
The following is a list of IRQ's (Interrupt Requests),
ing
which can be exempted much as the COM ports
and LPT ports above can. When an I/O device wants
to gain the attention of the operating system, it sig-
nals this by causing an IRQ to occur. When the op-
erating system is ready to respond to the request, it
interrupts itself and performs the service. When set
On, activity will neither prevent the system from go-
ing into a power management mode nor awaken it.
ON
Disabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
67
Chapter 4 BIOS Setup
Item Help
Advertisement
Table of Contents
