Select Sata-Raid Interface In System Bios - SOLTEK SL-PT880E-R Manual

SL-PT880E-R/PT880E-RL

5-2 Select SATA-RAID Interface in System BIOS

(1) Boot the PT880E-R/PT880E-RL system and watch for the following
initial screen to appear:
VIA Technologies, Inc. VIA VT8237 Serial RAID BIOS Setting Utility
V2.10 Copyright (C) VIA Technologies, Inc. All right reserved.
Scan Devices, Please wait ....
Press < Tab > key into User Window!
Channel 0 Master: ST3120023AS
Channel 1 Master: ST380023AS
(The above message indicates that the SATA hard disks on board are
detected by the RAID BIOS.)
(2) As soon as the above screen appears, press < Delete > key (not the
<Tab> key) to enter CMOS BIOS Setup. Choose "Integrated
Peripheral" and "VIA OnChip IDE Device". As soon as you click on
the "VIA OnChip IDE Device", a list of events appears for you to
configure their values. Choose "Enabled" for the "OnChip SATA/RAID"
so as to enable the SATA RAID interface.
VIA OnChip IDE Device:
To press< Enter > on VIA OnChip IDE Device will reveal the following
item(s).
OnChip SATA/RAID To e n a b l e / d i s a b l e t h e o n c h i p S ATA / R A I D
interface.
90