SOLTEK SL-85ERV4-R Manual page 77

SL-85ERV4-R / 85ERV4-RL
(5-4-3) The following screen shows that RAID 0 (Striping) is selected.
Now, use the "Arrow" key to mark up the "Auto Setup For Performance"
bar.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.10
Auto Setup For Performance
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
(5-4-4) Press <Enter> on the "Auto Setup for Performance" bar, and
the following screen shows up to ask you to confirm the RAID Creation.
Press <Y> key to continue.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.10
Auto Setup For Performance
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
You will create array
automatically, Are you sure?
Continue? Press Y/N
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
Drive Name Array Name
ST380023AS
No Drive
ST380023AS
No Drive
Drive Name Array Name
ST380023AS
No Drive
ST380023AS
No Drive
Chapter 5 VIA VT8237 RAID
Create A RAID array with the
hard disks attatched to VIA RAID
controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Mode
ATA 133
ATA 133
Create A RAID array with the
hard disks attatched to VIA RAID
controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Mode
ATA 133
ATA 133
80
Size(GB) Status
74.53 Hdd
74.53 Hdd
Size(GB) Status
74.53 Hdd
74.53 Hdd