SL-85ERV4-R / 85ERV4-RL
1-3 Mainboard Specifications
1-3.1 CPU Socket
CPU Socket 478B on board, supporting Intel
(including Intel Hyper-Threading and Prescott CPUs up to 3.0GHz) in the
478-pin package for :
-- 400/533/800MHz System Bus ;
512KB L2 Advanced Transfer Cache
-- Hyper-pipelined technology; Advanced dynamic execution;
-- Rapid Execution Engine; Streaming SIMD Extensions 2
-- 128 Bit Enhanced Floating Point Unit; Execution Trace Cache
1-3.2 System Chipsets
North Bridge VIA P4X533:
• Supporting 400/533/*800MHz Front Side Bus
• Supporting DDR 266/333/*400 SDRAM memory interface(DDR400
unguaranteed overclock support), HUB interface, AGP 8x/4X interface
as well as Hyper Threading Technology.
• Showing Hyper Threading Logo when booting with a Hyper Threading
CPU.
South Bridge VT8237:
• Supporting the 8X V-Link, LPC Super I/O, Upstream Hub interface,
PCI interface, IDE interface, LAN interface, USB V2.0 interface, SATA
RAID interface as well as the AC'97 6-channel Audio interface.
1-3.3 Memory
2 DDR DIMM 184-pin slots on board for non-ECC DDR 400/333/266
SDRAMs:
• Installation of mixed volumes yet same type of DDR SDRAM modules
supported .
1-3.4 AGP (Accelerated Graphics Port) interface
AGP Controller is embedded on board, supporting:
• 1.5V (8x/4x) power mode
• 8X 66MHz AD and SBA signaling; AGP pipelined split-transaction
longburst transfers up to 2GB/sec.
• One AGP Slot on board, AGP v3.0 compliant
Chapter 1 Specification
®
Pentium 4 processors
11
Need help?
Do you have a question about the SL-85ERV4-R and is the answer not in the manual?
Questions and answers