Using Via Raid Bios Setup To Create Disk Array - SOLTEK SL-85ERV4-R Manual

SL-85ERV4-R / 85ERV4-RL

5-4 Using VIA RAID BIOS Setup to Create Disk Array

(5-4-1) When you press <Enter> on the "Create Array" bar, the follow-
ing screen shows up. Press <Enter>on this bar to select the RAID mode.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.10
Auto Setup For Data Security
Array Mode RAID 1 (Mirroring)
Select Disk Drives
Start Create Process
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
(5-4-2) When you press <Enter> on the "Array Mode RAID 1 (Mirroring)
" bar, the following screen shows up. Press <Enter>on either RAID0 or
RAID1 bar to select the RAID mode.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.10
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAM for capacity
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
Drive Name Array Name
ST380023AS
No Drive
ST380023AS
No Drive
Drive Name Array Name
ST380023AS
No Drive
ST380023AS
No Drive
Chapter 5 VIA VT8237 RAID
Create A RAID array with the
hard disks attatched to VIA RAID
controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Mode
ATA 133
ATA 133
Create A RAID array with the
hard disks attatched to VIA RAID
controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Mode
ATA 133
ATA 133
79
Size(GB) Status
74.53 Hdd
74.53 Hdd
Size(GB) Status
74.53 Hdd
74.53 Hdd