R&S SpycerBox Cell Hardware Manual page 63

Another list will be displayed on the screen detailing the possible
source images. If there is only the R&S DVS recovery image on the USB
flash drive, this one will be listed. If there are several images, all will be
displayed.
Select the image you want to use for the recovery. Normally, it
8.
provides the serial number of the R&S DVS system in its name. To
confirm your choice press [Enter] on your keyboard.
The system will ask you to confirm your selection and whether you
want to continue:
To start the recovery process type in y for 'yes' and press [Enter]
9.
on your keyboard.
To abort the process at this point enter n for 'no' and press [Enter] on
your keyboard. You will be redirected to the DVS Rescue script.
After starting the process a termination is not possible anymore.
The program will now start the recovery process. Its progress will be in-
dicated on the screen.
The recovery process may take some time.
If during the process the screen turns black, press [Space] to get it back
again.
When the system has finished the recovery process, you will be notified
about this. Then after pressing [Enter] on your keyboard, you will be re-
directed to the DVS Rescue script once more where you can choose,
for example, 'reboot' or 'poweroff' to restart or turn off the system. The
next time the R&S DVS system is started, it will load the restored oper-
ating system.
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
 Backup or Recovery of the System Disk
Maintenance
5-25