R&S SpycerBox Cell Hardware Manual page 21

Further information about how to remove and exchange a hard disk can
be found in section "Hard Disk Maintenance" on page 5-2.
hard disk
lever
disk carrier
The LEDs to the top left of each hard disk on the hard disk tray indicate
its status.

LED off indicating the hard disk is idle

LED green indicating the hard disk is accessed

LED green blinking indicating disk activity

LED red indicating a hard disk or hard disk carrier related error has
occurred

LED red blinking indicating a hard disk location process in the
SAN Remo software or a hard disk or hard disk carrier related error
has occurred
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
hard disk lever
Figure 2-4: Hard disk carrier overview (SpycerBox Cell)
Can be a system/metadata hard disk or the stor-
age data hard disk. There are three types avail-
able: SAS, SATA and SSD hard disks (see
section "Variants of the SpycerBox Cell" on
page 2-2 for further information about available
types and options).
The lever can be used to pull the disk carrier and
its hard disk out of the system.
The disk carriers hold each one hard disk of the
array. The hard disks are mounted to the disk
carriers with several screws.
Overview
 Overview of the Front
disk carrier
2-7