Restoring The System Disk - R&S SpycerBox Cell Hardware Manual

The system will ask you to confirm your selection and whether you
want to continue:
To start the backup process type in y for 'yes' and press [Enter] on
9.
your keyboard.
To abort the process at this point enter n for 'no' and press [Enter] on
your keyboard. You will be redirected to the DVS Rescue script.
After starting the process a termination is not possible anymore.
The program will now start the backup process. Its progress will be in-
dicated on the screen.
The backup process may take some time.
If during the process the screen turns black, press [Space] to get it back
again.
When the system has finished the backup process, you will be notified
about this. Then after pressing [Enter] on your keyboard, you will be re-
directed to the DVS Rescue script once more where you can choose,
for example, 'reboot' or 'poweroff' to restart or turn off the system.

5.5.2 Restoring the System Disk

The following describes the steps to make a recovery of the system
hard disk:
Selecting wrong target device
For example, selecting the wrong target device can lead to a total
loss of data.
Do not execute any commands if you are not sure about the
correct source and target device.
To complete the loading of the DVS Rescue environment some user en-
tries are required. For this follow the instructions given on the screen.
The loading of the environment and the process itself will both try to ini-
tialize hardware that may not be present on your system. Any error mes-
sages displayed during loading/initialization, e.g. Failed or Warning,
can be disregarded. The backup/recovery process should work nonethe-
less.
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
 Backup or Recovery of the System Disk
Maintenance
5-23