R&S SpycerBox Cell Hardware Manual page 25

expansion panel for
Fibre Channel option
fixed main connector
panel
fixed RAID controller
DisplayPort
DVI connector
To provide connections to most networks there are various interface
possibilities optionally available for the SpycerBox Cell, such as the fol-
lowing:
DisplayPort
network connector
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
Here you can configure your Fibre Chan-
nel option when ordering the
SpycerBox Cell. The following options are
available:

Dual-channel 16 Gbit/s FC

Quad-channel 8 Gbit/s FC

Quad-channel 16 Gbit/s FC
For further information about this, please
see section "Variants of the
SpycerBox Cell" on page 2-2.
This is the fixed part of the controller pan-
el and cannot be changed on customer
request. Please refer to the description
starting with figure 2-8 on page 2-11.
This is the area where the RAID controller
is built in. It belongs to the fixed part of
the main controller panel and cannot be
changed on customer request.
network
connector
USB 3.0 port
Figure 2-8: Fixed main connector panel
Standard DisplayPort. You can connect a moni-
tor here.
Standard LAN network connection port.
Overview
 Overview of the Rear
USB 2.0 ports
status LED
2-11