R&S SpycerBox Cell Hardware Manual page 11


Do not perform any changes or extensions to the R&S system what-
soever.
Transportation
The SpycerBox Cell is a very sensitive device. Especially the hard disks
of the system must be handled with great care. Therefore, observe in
case of transportation:

Handle the R&S system with great care.

Always use the original packing or a similar structured packing for
transportation as detailed in section "Packing Instructions" on
page A-7.

Avoid shocks or vibrations during transport. For longer distances it
is recommended to use a lifting truck.

Keep the R&S system as a transportation good dry.

In the warranty period you have to keep the original packing and
use it in case of transportation.
Environmental Conditions
For error-free working and a long service life the SpycerBox Cell needs
some basic environmental conditions:

Do not expose the R&S system to sources of heat, such as direct
sunlight or a radiator.

Do not cover or obstruct the ventilation holes of the system.

When installing the R&S system in a rack, take care that warmed up
air is conducted to the rear of the rack and properly vented away.

Avoid areas with high humidity or dust. Best operating conditions
are given in an air-conditioned site.

Do not expose the R&S system to strong electric or magnetic fields.

Avoid areas where the R&S system will be subject to vibrations or
shocks.
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
Introduction
 Safety Instructions
1-5