R&S SpycerBox Cell Hardware Manual page 50

Maintenance
 Fan Failure Management
Step 2: Fastening the Faceplate
To fasten the faceplate to the system, perform the following:
Other spare parts
Others than the original manufacturer spare parts might damage
your system.
Only use original manufacturer spare parts.

Fasten the new faceplate to the system as described in section
"Faceplate" on page 2-4.
See to it that the faceplate plugs properly into the system's fan interface
and that, when completely inserted, the locking mechanism (dark grey
button at the right side of the faceplate) snaps back into its locked posi-
tion.
Having fastened the faceplate, no alarm should be sounded anymore.
5-12
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH