R&S Dvs San Remo - R&S SpycerBox Cell Hardware Manual

4.2 R&S DVS SAN Remo
R&S DVS's configuration management software SAN Remo can be
used to configure, reboot and shut down the SpycerBox Cell. It is in-
stalled on every SpycerBox Cell as standard.
SAN Remo will run in the web browser (Mozilla Firefox version 4 and
higher, Internet Explorer version 11 and higher, Google Chrome and Sa-
fari) on every client in the network. The address is either the localhost
(127.0.0.1) or the IP address of the SpycerBox Cell in the network as
shown in the display in the middle of the faceplate (see section "Face-
plate" on page 2-4). After starting it, you have to enter a user name (de-
fault: admin) and password (default: admin).
With SAN Remo you can change the configurations of the R&S DVS
system (e.g. its IP address or Fibre Channel connections). Select the
system represented by a node and click on the respective icon to view
and change the settings. Afterwards you will see all options that can be
changed. With the monitoring feature you can obtain a graphical over-
view of certain properties of different nodes.
SAN Remo can also be used to gather log files of the system, for exam-
ple, for troubleshooting. By default they will be saved in a single archive
file on the desktop of your system.
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
Figure 4-2: Plugin view in the SAN Remo software
Operation
 R&S DVS SAN Remo
4-3