Table of Contents
Advertisement
www.seagate.com
7. Performance
This section provides detailed information on performance-related features of Nytro 5350S SSDs.
7.1
Internal drive characteristics
Flash Memory Type
Emulated LBA Size
Native Programmable Page Size
Map Unit Size
7.2
Performance characteristics
7.2.1
Response time
Response times are measured with nominal power at 25°C ambient temperature. Normal values in the table below
are:
Page-to-page response time is an average of all possible page-to-page accesses for a sequentially preconditioned
drive.
Average response time is a true statistical random average of at least 5000 measurements of accesses between
programmable pages on a randomly preconditioned drive.
Table 6 - Typical Response Time (μsec)
Page to Page
Average Latency
These drives provide the highest possible performance under typical conditions. However, due to the nature of Flash
memory technologies many factors can result in values other than those stated here.
Seagate Nytro 5350S NVMe SSD Product Manual, Rev A
Read
Write
Execution time measured from receipt of the
75
15
Command to the Response. Assumes no errors.
Typical response times are measured under nominal
75
15
conditions of temperature and voltage as measured
on a representative sample of drives.
eTLC 3D NAND
512B, 520B, 4096B, 4104B, or 4160B
16KB
4096B
Notes
14
Advertisement
Table of Contents
