NovaPro HD User's Manual
HD to log in control page.
Mode 3: NovaLCT client operation. Connect NovaPro HD to control computer and all
configurations can be completed on NovaLCT-Mars client. Then send to NovaPro HD.
Note: Interlace operation of machine, LCT and Web is not allowed.
Please refer to the following chapter for detailed operation steps.
6 Machine Operation
LED display can be started with moderate brightness and used normally through five simple
steps.
Menus of Display Control, Advanced Settings, Communication Settings and Language can
help users to better control LED display.
6.1 Description of operation action
Knob: Press the knob to enter into menu and turn it to adjust values or select submenus. At
this time, enter into the submenus or confirm adjusted values by pressing the knob.
【ESC】: Return key, exit from current menu or operation.
Option buttons of six input sources: Short press a button to set it as the input source of
main screen while long press to set as the source of PIP.
Lock: simultaneously press the knob and ESC button for more than three seconds to lock
the controller.
Unlock: simultaneously press the knob and ESC button for more than three seconds to
unlock the controller.
6.2 Main Interface
After starting the controller, the main interface of LCD display is as follows:
www.novastar.tech
-7-