Konica Minolta BC-10 Plus Instruction Manual page 39

Connecting to a PC
❷
Updating the drive manually
If the connected instrument is not displayed under [Ports (COM & LPT)] and is
instead displayed under [Other Devices] as "! Unknown Device", the USB driver will
need to be installed manually.
❷-1 Right-click on the unknown device
marked with "!"
❷-2 Select [Update Driver Software], and
click "Locate and install driver
software manually."
❷-3 Specify the APP folder in the
instrument's mass storage folder as
the save destination, and click "Next".
Click "Install" on the confi rmation
screen with the message that reads,
"Would you like to install this device
software?"
(Cont.)
After installing, click "Close".
❷-4 Confi rm the COM port number from
step ❶, and then navigate to [Device
Manager] → [Ports (COM & LPT)]. If
"Measuring Instruments(COM**)" is
displayed, driver update has been
completed.
Disconnecting from a PC
Operating Procedure
MENU/OK
❶
Press when "Connecting to
PC" is displayed on the instrument.
The instrument will be disconnected from
the PC, and the display will return to the
measurement screen.
Memo If the PC application is running, the
PC application will also be exited.
Click "OK" when the following
message is displayed.
39
10:00
Connecting
to PC.
Quit