Checking The Included Accessories; Standard Accessories - Konica Minolta BC-10 Plus Instruction Manual

Checking the Included Accessories

This instrument can be used with the following standard accessories and optional accessories.
Memo The shape of some products may be different from those shown.

Standard Accessories

Verify that all of the following items are included.
■ Target Mask
Approx. ø8 mm, w/ protective aperture plastic plate
The target mask is used for aiming and correctly
measuring a measurement location.
Memo This instrument comes shipped from the factory
with the target mask already attached.
■ White Calibration Cap CR-A86
Used to perform white calibration.
Memo When not in use, put on the dedicated lid and
store the cap.
■ USB Cable IF-A25
Used to connect the instrument to a PC.
When using the USB bus power AC adapter, power will be
supplied through the USB cable (IF-AF25).
■ Protective Cover CR-A91
This set prevents foreign contaminants from getting inside
the instrument when used in locations prone to dust.
■ Wrist Strap CR-A73
Used to prevent users inadvertently dropping the
instrument.
■ Protective Cap CR-A93
■ Soft Case CR-A98
Holds the instrument and the white calibration cap.
■ 4 AA Batteries
8