Instrument Settings; Mask Setting - Konica Minolta BC-10 Plus Instruction Manual

Instrument Settings

Mask Setting

— Confi gure as necessary —
"Auto Detect" is set under Mask Setting on the instrument when shipped from the factory.
If for some reason automatic detection is not possible, confi gure the settings appropriately
for the target mask attached.
In such cases, automatic mask detection will be turned OFF. No warning will be
generated even if the attached mask is different from that set. Take careful care when
using.
1
Go to the "Measure" screen.
2
Select the type of target mask attached.
○Auto ○MAV
Instrument Menu Customization
1 2
Setting
Initial Setting Setting
The attached target mask will be automatically
● Auto
detected. This is the recommended setting.
When the target mask cannot be detected
MAV automatically, confi gure the settings appropriately for
the target mask attached.
46
Details