Connecting To A; Connecting To/Disconnecting From A - Konica Minolta BC-10 Plus Instruction Manual

Connecting to a PC
This instrument is equipped with a USB connection terminal.
The included USB cable (IF-A25) can be used to connect the instrument to a PC and transmit data as well as to allow the instrument to be controlled or confi gured from a PC application.
Notes • Do not connect any cable other than the designated cable to the USB
connection terminal.
• When connected via USB and communicating, communications may be
interrupted by being exposed to strong external static electricity or radio
waves from the surrounding area. In such cases, turn the power OFF
and then turn it ON again.
• Firmly connect the USB connector plug in the correct orientation.
• Always connect and disconnect the USB cable by the connector's plug.
Do not pull it out by the cable itself or bend it with unreasonable force.
Doing so may break the cable.
• Connect the instrument using a cable with a suitable length. If the cable
is not of a suitable length, connection problems may arise or the cable
may break.
• Firmly push in the USB cable connector that matches the shape of the
port (connection terminal) until it can go in no further.
• With Windows 10 or 11, if the instrument can only be operated using
USB Feed, set "USB selective suspend setting" under Power Options to
"Disabled".
Memo The USB communication port on the instrument is USB 2.0-compliant.
Connecting to/Disconnecting from a PC
(Connection diagram)
USB cable
IF-A25
BAKING METER
BC-10 Plus
Connecting to a PC
Operating Procedure
❶
Connect the Micro-B connector of the USB cable to the USB connection
terminal on the instrument.
Firmly push it in until it can go no further and verify that it is securely connected.
❷
Verify that the instrument power has been turned ON.
MENU/OK
❸
Press , move the selection frame to "USB Connec."
using either or , and then press
PC
(Commercially available)
Ver.1.10.0000
MENU/OK
MENU
.
Back
Browse Data
Mask Setting
Auto Off
Date/Time
USB Connec.
37