Table of Contents
Advertisement
Measurement
Measurement
Notes
Make sure to perform white calibration before measuring. For details, refer
to "White Calibration" on page 27.
• For accurate measurements, measure under the same conditions
(ambient temperature, etc.).
1
Press the [Measure] tab to open the measurement screen.
2
Set the sample surface aperture on the sample to
measure.
3
A
[When measuring remotely]
a-1
Click "Measure" on the PC application.
Beep
The measurement results will be displayed in the [Latest Meas.] tab on the PC
application.
Memo
When changing the display format of the instrument's LCD screen with trigger
measurement, check the box for "Use Measure Button on Inst." and click the
radial beside the display format to use.
B
[When measuring using a trigger]
b-1
Check the box for "Use Measure Button on Inst."
b-2
Press the measurement button on the instrument.
Beep
The measurement results will be displayed on the instrument and in the [Latest
Meas.] tab on the PC application.
Continuously perform measurement in the same way to measure consecutively.
To perform the most recent measurement again, click the " Undo" key.
b-1
1
55
a-1
Advertisement
Table of Contents
