Table of Contents
Advertisement
Connecting to a PC
❹
Move the selection frame to "PC" using either
MENU/OK
, and then press
.
"Connecting to PC" will be displayed on the instrument.
Memo
Pressing the MENU/OK key while "Connecting to PC" is
displayed on the screen will cause the instrument to be
disconnected from the PC.
❺
Connect the A connector of the USB cable to the USB port
on the PC.
After connecting to the PC, the instrument will be recognized
as a mass storage device, and an AutoPlay dialog box will be
displayed.
Memo
If the instrument is not recognized as a mass storage
device, disconnect and reconnect the cable, and start the
procedure over again from step 2.
(Cont.)
or
10:00
MENU
Back
USB Connec.
Disconnect
PC
Printer
When First Connecting to the PC
Notes
• To use a PC application with the instrument connected to a PC, the
dedicated USB driver must be installed.
• If the PC being used is connected to the Internet, the Windows updater
will be used to automatically install the drivers.
• Installation may take several minutes.
• Once installation is complete, a COM port will be assigned to the
instrument.
• If the PC's operating system is Windows 10 or Windows 11, the USB
driver will be installed automatically when the fi rst time the instrument is
connected to the PC.
If the PC is not connected to the Internet, manually install the drivers by accessing the
APP folder in the instrument's mass storage folder.
❶
Checking the connection status (COM port number)
[Windows 10, Windows 11]
Right-click on the Start button in the lower-left corner of the screen, and navigate to
[Device Manager] → [Ports (COM & LPT)].
Measuring Instruments(COM**): The COM port number assigned to the
instrument will be displayed for "**".
"USB Serial Device(COM**)" may be displayed.
Regardless of the PC's OS, if the connected instrument is not displayed under
[Ports (COM & LPT)] and is instead displayed as an "Unknown device" with an "!"
mark, follow the procedure under "Updating the drive manually".
38
Advertisement
Table of Contents
