Avg. Meas - Konica Minolta BC-10 Plus Instruction Manual

Measurement

Avg. Meas.

Using the average measurement function when measuring makes it possible to obtain
data that is even more accurate.
If the sample color is uneven, the accuracy of the measurement can be improved by
randomly measuring locations within the sample area to calculate the average for the
sample, or by repeatedly measuring the same sample location to calculate the average
for that location.
Notes After an average is determined for the instrument, because the average is
converted for each color space and displayed, the simple averages for
measurements of each count may not match.
1
Measure repeatedly until the desired measurement count is
reached.
Memo To perform the measurement again during average measurement, click "
Undo".
Notes Averaging can be performed for data from up to 16 measurements.
After 16 measurements, averaging will be performed for the 16 most recent
measurements.
2
Display the measurement results.
The minimum and maximum BCU values from the conducted measurements will
be displayed in the [Measure] tab along with the most recent measurement
results.
In addition, the average will be automatically calculated from the number of
performed measurements and displayed.
3
Reset the average.
Click "Avg. Reset".
Continuing with measurement will start the measurement count from "01".
(Cont.)
2 3
56
1