Camshaft Assembly; Camshaft Gear And Bearing Assembly - New Holland LS140 Workshop Manual

Op. 10 106 40

CAMSHAFT ASSEMBLY

Inspection
Check the journals and cams for wear and damage.
Replace if the allowable limit is exceeded.
Correct uneven wear or small scratches on the cam
surface with an oil stone.
Cam Height (intake and exhaust cams), 1.
Standard Value
34.065 - 34.12 mm
(1.3411" - 1.3433")
Height of Cam for Injection Pump, 2.
Standard Value
41.94 - 42.06 mm
(1.6512" - 1.6559")
Height of Cam for Fuel Feed Pump, 3.
Standard Height
31.9 - 32.0 mm
(1.2559" - 1.2598" )
Op. 10 106 66
CAMSHAFT GEAR AND BEARING
ASSEMBLY
If these items have been replaced, it is essential that
the spacers, shims, etc. are assembled in the order
shown here.
To replace the camshaft gear assembly, the
assembly will require pressing off and on.
SECTION 10 - ENGINE
Allowable Limit
33.7 mm
(1.3268")
Allowable Limit
41.8 mm
(1.6457")
Allowable Limit
30.0 mm
(1.1811")
10-55
2
5
4
1. Camshaft gear
2. Camshaft and key
3. Tachometer gear
4. Spacer
5. Roller bearing
6. Shim
7. Slider
Copyright © New Holland
81
3
1
6
7
82