7. Install the brush plate onto the motor housing.
Install the insulated brushes into the holder.
Ensure the insulated brush leads are not
grounded. Avoid getting oil or grease on the
brushes or commutator.
8. Install the motor into the drive housing observing
the scribe marks. Install the retaining bolts and
torque to 7 - 12 N·m (5 - 9 ft. lbs.).
9. Reconnect the lead wire from the electric
solenoid.
SECTION 55 - ELECTRICAL SYSTEM
SM463-224
SM463-225
SM463-226
55-160
Copyright © New Holland
242
243
244