Cab And Boom Tilt Procedure - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

CAB AND BOOM TILT PROCEDURE

The cab and boom assembly can be tilted forward for

easier access to the major skid steer hydrostatic

transmission or engine components. To tilt the cab,

the proper cab tilting tool must be used to ensure

safety and to prevent damage to the skid steer frame,

cab, and boom structure. Contact your New Holland

dealer for major service or repairs of the skid steer.

Using the proper cab tilting tool and following these

steps, the cab and boom can be tilted forward.

Cab Tilting Jack and Support Bracket

Jack and Screw Assembly

Lower Support

Upper Support

1. Remove any attachment, bucket, etc. from the

boom quick-attach plate.

2. Raise the boom and lower onto boom lock pins,

a. Raise boom above boom lock pins.

b. Engage boom lock pins.

c. Stop engine, ignition key off position.

d. Turn ignition key to the on position.

e. Lower boom onto boom lock pins.

Turn the ignition key to the "OFF" position.

SECTION 00 - GENERAL INFORMATION

Table of Contents