Attachment Mounting Plate - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

Op. 82 100 70

ATTACHMENT MOUNTING PLATE

The attaching plate is attached to the main boom

frame with two tapered pivot pins. The attachments

used on the skid-steer loader can be easily attached

or removed from the loader with the over center lev-

ers and pins. The control levers and pins are spring

loaded to hold the levers over center when unlatched

to assist in changing attachments. When the control

levers are in the latched position the spring-loaded

pins are forced into the latch points on the attach-

ment. The control levers and pins are shown in the

unlatched position.

The #9841460 attachment mounting plate now incor-

porates slots at two locations, 1, so that additional

non-New Holland attachments can be fitted if they re-

quire dimensions as shown.

A - 333 mm (13-1/8")

B - 313 mm (12-5/16")

C - 279 mm (11")

Do not cut or weld on the attachment mounting plate

to make non-New Holland attachments fit. If the at-

tachment does not fit the mounting plate, do not use

the attachment.

Table of Contents