Forearm Rests - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 88 - ACCESSORIES

FOREARM RESTS

The forearm rests are attached to the side of the op-

erator's cab (one each side) to be used to support the

operator's arms while operating the skid steer. The

armrest may be pivoted up when not being used or

for operator entry and exit of the operator's area. The

armrest may be used in any combination of controls,

boom/bucket hand controls or boom/bucket foot con-

trols. Using the armrest in combination with the boom

and bucket hand controls provides the operator with

arm support during boom and bucket operations.

NOTE: The cab armrest pad kit cannot be installed

in combination with the forearm rest kit. The armrest

pads are glued to the same area of the operator's cab

that the forearm rests are attached.

The LS140 and LS150 armrests mount with the

bracket, 1, hanging toward the inside of the cab. Pivot

the armrest up and down, and adjust the two clamp

bolts, 2, if binding occurs, or to retain the armrest in

the raised position.

Table of Contents