Pedal Inspection (With Boom And Bucket Hand Controls) - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

PEDAL INSPECTION

With Boom and Bucket Hand Controls

1. Remove the bucket hub arm assembly, 1, and

the boom hub arm assembly, 2. Inspect the hub

arm assemblies for any deformation or cracks.

2. Inspect the control shaft, 3, for any obvious dam-

age or bends. To remove control shafts, remove

the two allen screws, 4, securing the auxiliary hy-

draulic hub, 2, to the control shaft. Then remove

the bolt, 5, securing shaft arm to pedal. Take note

of the position and number of any spacer wash-

ers or shims.

3. Remove the two allen screws, 1, securing the

boom hydraulics hub, 2, to the control shaft. In-

spect the boom hydraulics hub for any deforma-

tion or cracks.

4. Inspect the shaft bearings, 1, for excessive wear.

If bearings do not move freely, replace.

SECTION 35 - HYDRAULIC SYSTEM

Chapters

Table of Contents