Cooling System Operation - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

COOLING SYSTEM

SPECIFICATIONS

Capacity - 10.3 L (10.8 qts.)

Mixture - 50/50 antifreeze/water

Radiator cap - 0.5 bar (7 PSI)

80° C - 84° C (176° F - 183° F)

94° C (201° F)

EIC starts reading degrees at 45° C (113° F)

or 0° C (32° F)

EIC signals an overheat condition at 102° C

The EIC (Electronic Instrument Cluster) monitors the

engine coolant temperature during operation and will

signal the operator should an overheat condition

The EIC will read COLD at start-up and will start

reading in degrees at 45° C (113° F) or 0° C (32° F).

The EIC will default from any other monitored

function to the coolant function when a overheat

condition occurs at 102° C (216° F).

The cooling system has a recovery tank, 1, for

coolant expansion.

The radiator can easily be cleaned by raising up the

two handles, 2, to slide the radiator to the rear and

separate it from the oil cooler for cleaning.

IMPORTANT: Always reposition the radiator before

closing the rear door; damage to the radiator or

expansion tank may occur.

The cooling system must be filled with a 50/50

mixture of antifreeze and water for winter and

summer protection.

IMPORTANT: Always top off the cooling system with

a 50/50 antifreeze/water mixture. Always refill a

drained cooling system with a 50/50 antifreeze/water

Top off by adding coolant to the recovery tank, not the

SECTION 10 - ENGINE

Chapters

Table of Contents