Utility Fork - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

Op. 82 100 20

UTILITY FORK

The utility fork is for handling matted, stringy material

which is difficult to load into a standard bucket.

The standard tine spacing, center to center, is 21.8

cm (8-1/2"). The fork frame is equipped with addition-

al holes for additional tines reducing the tine spacing

to 10.9 cm (4-1/4").

Op. 82 100 11

Tine Installation

1. Slide each tine, 1, into the fork backplate for the

desired tine spacing, until the 1/2" x 2-3/4" bolt,

2, can be inserted through the fork backplate and

tine with the nut to the inside of the fork back-

2. Position the spacer, 3, as shown with the angle

end of the spacer next to the floor of the back-

plate. Secure the assembly with 1/2" lock washer

and nut. Tighten securely.

Table of Contents