Eic Board Self Test - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

EIC BOARD SELF TEST

When first sitting in the operator's seat and/or before

entering Diagnostics, allow the EIC board to self test.

(Service/Run switch in the "RUN" position)

Sit in operator's seat.

1. The EIC board should light all symbol lights.

2. The character display should read "8888.8", 1,

and the fuel gauge (light bar), 2, should light

showing 9 bars.

SECTION 55 - ELECTRICAL SYSTEM

3. The EIC will enter the normal start up mode.

4. Turning the ignition key to the "ON" position will

NOTE: The preheat times will vary from 0 - 20

seconds, depending on engine temperature.

If the EIC does not function as described, check the

seat and seat belt switches for proper operation and

EIC board power and ground circuits.

start the automatic engine preheat system (if

Table of Contents