Checking The Loader Faceplate - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

CHECKING THE LOADER FACEPLATE

1. Check the height of the loader faceplate from the

top of the plate at 1, to the bottom of the plate at

2: 396.9 mm ± 0.8 mm (15-5/8"). To check the

faceplate, place a 24" square over the top of the

plate as shown at 4, and a straightedge at 5.

If the faceplate is not within specifications, the

plate will require replacement.

2. Check the faceplate pods to ensure they are

straight with each other and not twisted. Place a

straightedge across both pods as shown at 1,

across the front flat surface and at 2, the top of

If the pods are not straight, the faceplate will re-

quire straightening or replacement.

Table of Contents