1-4.6 Bios (Basic Input Output System); 1-4.7 Multi-I/O Functions; 1-4.8 Sata Raid Interface - SOLTEK K8AV2-R Manual

1-4.6 BIOS (Basic Input Output System)

Flash Memory for easy upgrade, supporting BIOS Writing Protection,
Year 2000 compliant, and supporting various hardware configuration
during booting system (See Chapter 4 BIOS Setup):
• Standard CMOS Features (Times, Date, Hard Disk Type etc.)
• Advanced BIOS Features (Virus Protection, Boot Sequence etc.
• Advanced Chipset Features (AT Clock, DRAM Timing etc.)
• Power Management Features (Sleep timer, Suspend Timer etc.)
• PNP/PCI Configurations (IRQ Settings, Latency Timers etc.)
• Integrated Peripherals (Onboard IO,IRQ, DMA Assign. etc.)
• SmartDoc Anti-Burn Shield (CPU/System Temp.,Fan speed etc.)
• Frequency/Voltage (CPU clock, Voltage of CPU, DIMM, AGP etc.)

1-4.7 Multi-I/O Functions

• PCI EIDE Controller, supporting:
-- 2 ATA 133 / 100 / 66 IDE connectors supporting up to 4 IDE devices
• Dedicated IR Functions:
-- 1x5 IR connector dedicated to IR function with Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode parallel data transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Drive Connector:
-- 1 FDD connector supporting 2 floppy drives with drive swap support
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant, 480 Mb/s USB Bus, supporting Win 98se and later
operating systems; USB drivers provided in Support CD for installation
-- 2 built-in USB connectors; 3 more USB pin-headers which require 3
additional USB cables to provide 6 more USB ports
-- USB Wake-up function supported by USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- 2 serial ports (COM1 & COM2) on board

1-4.8 SATA RAID Interface

Serial ATA RAID Interface supported by VT8237:
• Supporting 2 SATA connectors for 2 SATA RAID Hard Disks with
150Mb/s transfer rate
• SATA RAID Drivers enclosed in Support CD/Floppy Diskette for user's
installation
Chapter 1 Specification
13