SOLTEK K8AV2-R Manual page 74

PNP OS Installed Allows you to configure the PNP devices by BIOS
Reset Configuration
Resource Controlled
IRQ Resources Press Enter. Please refer to the list below:
Phoenix - AwardBIOS CMOS Setup Utility
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
: Move Enter: Select
F5: Previous Values
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
Assign IRQ For VGA To enable/disable to assign IRQ for VGA.
Assign IRQ For USB To enable/disable to assign IRQ for USB.
or O/S.
Choices: No(by BIOS); Yes(by O/S)
Normally, you leave this Disabled(default). Select
Data Enabled to reset Extended System Configuration
Data (ESCD), when you exit Setup if you have in-
stalled a new add-on and the system reconfiguration
has caused such a serious conflict that the operat-
ing system cannot boot.
The Plug and Play Award BIOS can automatically
By configure all the boot and Plug and Play compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields will not appear,
as the BIOS automatically assigns them. If you se-
lect Manual, the IRQ Resources item will appear for
your configuration (see below).
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
and to modify the information delivered from the
feature Connector of the VGA card to MPEG card.
This option can solve the display inversion to black
after you have used a MPEG card.
77
Chapter 4 BIOS Setup
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults