Table of Contents
Advertisement
K8AV2-R / K8AV2-RL
5-5 Using VIA RAID BIOS Setup to change Array mode
(5-5-1) If you wants to change the RAID mode, say, from RAID0 to
RAID1, you must return to the Initial RAID BIOS Setup screen. Then,
press the "Arrow" key to mark the "Delete Array" bar and press <Enter>.
(5-5-2) Instantly, the Bootable Hard Disk(s) is marked up for deletion.
Press <Enter> key on this screen to delete the set-up array.
92
Advertisement
Table of Contents
