SOLTEK K8AV2-R Manual page 63

K8AV2-R / K8AV2-RL
AGP & P2P Bridge Control:
To press< Enter > on AGP & P2P Bridge will reveal the following item
(s).
AGP Aperture Size Options: 32; 64; 128; 256M. Memory mapped and
AGP Driving Control To automatically/manually set AGP Driving Control.
AGP Driving Value To input AGP Driving Value if you have set "Manual"
AGP Fast Write This item will enable the AGP mode into fast write
AGP Master 1 WS
AGP Master 1 WS
graphics data structures can reside in a Graphics
Aperture. This area is like a linear buffer. BIOS will
automatically report the starting address of this buffer
to the O.S.
in above item.
Choices: 00~FF in 01 stepping
mode. If your graphics card does not support this
function, please do not enable this function.
To enable / disable the support of AGP Master 1
Write Waite State Write.
To enable / disable the support of AGP Master 1
Read Waite State Read.
66