To Install Usb 2.0 Driver - SOLTEK K8AV2-R Manual

K8AV2-R / K8AV2-RL

3-4 To Install USB 2.0 Driver

VIA USB V2.0 is already integrated on board. Its 480Mb/s transfer rate
supports operating systems Windows 98SE/Me/2000/XP. USB Driver
installation procedures are of similar steps in these systems. Before
installing VIA USB V2.0 Driver on Windows XP, users should install the
latest Service Pack for Windows XP. Please take the following illustra-
tions from Windows XP as the USB driver installation guide:
1. Update Windows XP with the latest service pack before installing
VIA USB V2.0 Driver.
2. Following the procedures of opening the Support CD, click to choose
"VIA USB 2.0 Driver" to proceed. Please notice that the USB card
driver is different from the USB 2.0 driver typically for the on-board
USB. Do not use the USB card driver here.
3. Instantly the "USB 2.0 Setup Program" will pop up on screen. Click
"Next" to continue.
Next
42