SOLTEK K8AV2-R Manual page 69

K8AV2-R / K8AV2-RL
SuperIO Device:
To press< Enter > on SuperIO Device will reveal the following item(s).
Onboard FDC
Controller
Onboard Serial
Port 1 / Port 2
UART Mode Select The serial port on your system may offer a vari-
x UR2 Duplex Mode This options controls the operating mode between
Onboard Parallel Port This item allows you to determine onboard parallel
Parallel Port Mode Select an operating mode for the on-board parallel
x ECP mode Use DMA Select a DMA channel for the port when you choose
Game Port Address Allows you to select the Game Port Address.
Midi Port Address To configure the onboard Midi port address.
Midi Port IRQ This item allows you to select the Midi Port IRQ.
To enable/disable the onboard Floppy Disk Drive
Controller.
Select an address and corresponding interrupt
for the first/second serial port.
Choices: Disabled; Auto;
3F8/IRQ4; 2F8/IRQ3;
3E8/IRQ4; 2E8/IRQ3
ety of infrared port modes. Click here for a de-
scription of various modes.
The choices: Normal; IrDA; ASKIR; SCR
receiving and transmitting of IrDA or ASKIR or SCR.
Choices: Half (asynchronous); Full (synchronous)
port controller I/O address setting.
Choices: 378H/IRQ7; 278H/IRQ5; 3BC/
IRQ7; Disabled
(printer) port.
Choices: SPP; EPP; ECP; ECP+EPP
ECP or ECP+EPP mode for the Parallel Port Mode.
Choices: 1; 3
Choices: Disabled, 201, 209
Choices: Disabled, 330, 300
Choices: 5, 10
72