Seat Tarraco 2022 Owner's Manual page 326

●
When both vehicles are in motion, release the
clutch pedal.
●
As soon as the engine starts, depress the
clutch and disengage the gear to avoid collid-
ing with the towing vehicle.
NOTICE
When tow-starting, unburnt fuel could enter
the catalytic converter and damage it.
Towing
Previous steps
●
Secure the tow cable or tow bar using only
the attachment points provided for this purpose
›››
. Depending on the equipment, these
points may be a towing device or a towing eye.
●
Make sure the tow cable is not twisted. Other-
wise the towing eye could unscrew during tow-
ing.
●
Switch on the ignition and the hazard warning
lights of both vehicles. If necessary, take into
account other different provisions that may ex-
ist in this regard.
●
Take into account the instructions on towing
provided in the instruction manual of the other
vehicle.
324
Miscellaneous situations
Towing vehicle (front)
●
Do not actually start driving until the cable is
tight.
●
Accelerate with particular care.
●
Avoid sudden braking and manoeuvres.
Vehicles with a manual gearbox:
●
When starting to drive, use the clutch very
gently.
Towed vehicle (behind)
●
Make sure the ignition is switched on so that
the steering wheel does not lock and so that, if
necessary, you can use the turn signals and the
windscreen wiper.
●
The brake servo and power steering only
work when the engine is running. Otherwise,
you will have to depress the brake pedal con-
siderably harder and more force will be needed
to turn the steering wheel.
●
Release the electronic parking brake.
●
Make sure the tow cable is always taut.
●
Disengage the gear or place the gear selec-
tor in the Nposition.
WARNING
Never attach the tow rope or tow bar to axle
or running gear components. They could be
damaged, resulting in an accident and seri-
ous injury.
●
Seek specialist assistance and, if applica-
ble, have the vehicle transported on a tow
truck.
NOTICE
The vehicle can only be towed if the state of
charge of the 12-volt battery is sufficient to
disengage the electronic parking brake and
the steering column lock. If the vehicle has
no power supply or there is an electric sys-
tem fault, the engine must be jump-started
to release the electronic parking brake and
deactivate the electronic lock of the steering
column.