Seat Tarraco 2022 Owner's Manual page 232

WARNING
The image from the cameras does not make
it possible to calculate the distance to the
obstacles (people, vehicles, etc.) precisely,
so using them could cause serious accidents
and injury.
●
The camera lenses augment and distort
the visual field and the objects on the screen
are seen differently and imprecisely.
●
Certain objects may not be shown or may
not be shown very clearly, for example, posts
or thin rails, due to the screen resolution or if
light conditions are insufficient.
●
The cameras have blind spots in which ob-
stacles and people are not registered.
WARNING
The smart technology incorporated into the
Top View Camera system cannot overcome
the limits imposed by the laws of physics
and it only works within the limits of the sys-
tem. The greater convenience provided by
the Area View system should never tempt
you to take any risk that may compromise
safety. If used negligently or involuntarily,
it may cause serious accidents and injuries.
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style to
suit visibility, weather, road and traffic condi-
tions.
●
Do not be distracted from the traffic by
looking at the screen.
230
Parking and manoeuvring
●
Monitor the area around the vehicle at
all times, since the cameras do not capture
small children, animals and certain objects in
all situations.
●
The system will probably be unable to rep-
resent all areas clearly.
NOTICE
●
The camera images are only two-dimen-
sional. Due to a lack of spatial depth, objects
that jut out or holes on the road, for example,
are more difficult to detect or may not be
seen at all.
●
In certain circumstances, the camera does
not capture objects such as beams, fences,
posts or thin trees, which could damage the
vehicle.
●
The system displays the auxiliary lines and
boxes regardless of the vehicle's environ-
ment, no objects are detected. The driver is
responsible for determining that the vehicle
will fit in the parking space.
Area View system
Fig. 169 Display of the Area View system:
aerial view.
There are four different views to choose from
›››
Fig. 169:
Front camera area
A
Right camera area
B
Rear camera area
C
Left camera area
D
Function buttons:
Exit the current display.
Adjust the display: bright, contrast and
colour.
Three-dimensional views