Seat Tarraco 2022 Owner's Manual page 17

Instrument cluster views
To switch between the different views press the
button on the multifunction steering wheel.
The following views can be displayed:
●
Main: Digital speedometer with secondary
indications.
●
Speed: Classic representation of the speed-
ometer as a circular instrument with secondary
indications in the centre of the dial.
●
Rev counter: Classic representation of the rev
counter as a circular instrument with secondary
indications in the centre of the dial.
The amount and content of the information dis-
played may vary depending on the equipment.
Note
After switching off the ignition, a display
appears showing vehicle status information,
such as distance travelled.
Select secondary indications in the "Main" view
The secondary indications or
B
dividually configured or hidden. Proceed as fol-
lows to select the secondary indications:
1. Use the keys and to select the right
or left secondary indications area.
B C
2. Use the thumbwheel on the multifunction
steering wheel to select the desired secon-
dary indication.
3. Confirm your selection by pressing the
button.
Driver information Instrument panel
Selecting secondary indications in the "Speed"
or "Rev counter" views
1. Use the thumbwheel on the multifunction
steering wheel to select the desired secon-
dary indication.
2. Confirm the selection by pressing
Note
If when switching on the ignition warnings
are shown about existing faults, it might not
be possible to change the settings or show
the information as described. If the fault
continues, visit a duly qualified specialised
workshop. SEAT recommends visiting a SEAT
dealership.
can be in-
C
.
15