Front towline anchorage
Fig. 224
Front bumper on right: remove the lid.
Fig. 225
Right side of the front bumper: towline
anchorage screwed in.
The housing of the removable towline anchor-
age is on the right side of the front bumper un-
›››
derneath a cover
Fig. 224.
The towing eye should always be kept in the
vehicle.
Miscellaneous situations
Towing the vehicle
Bear in mind the instructions for towing
›››
page 323.
Fitting the towline anchorage
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››
Fig. 224.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››
›››
Fig. 225
,
. Use a suitable object that
can completely and securely tighten the towing
eye in its housing.
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and push it in until it clicks
into place.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and firmly tightened. Otherwise, it could
jump out of the housing during towing.
Rear towline anchorage
›››
page 318.
Fig. 226
Rear bumper on right: remove the lid.
Fig. 227
Right side of the rear bumper: towline
anchorage screwed in.
The housing of the screw towing eye is on
the right side of the rear bumper behind a lid
›››
Fig. 226.
325