Seat Tarraco 2022 Owner's Manual page 175

Steering fault
The control lamp lights up or flashes yellow.
The steering is stiffer or reacts more sensitively
than usual.
The control lamp lights up and remains lit:
●
Restart the engine and drive slowly for a short
distance. Contact a specialist workshop if the
control lamp remains on.
●
OR: the 12-volt battery was disconnected
and reconnected. Drive slowly for a short dis-
tance.
The control lamp flashes:
●
Turn the steering wheel slightly from one side
to the other.
●
Turn off the ignition and turn it on again.
●
Consider the warnings shown on the instru-
ment cluster display.
●
If the control lamp continues flashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
SEAT Drive Profiles
Introduction
The driver can use the drive profiles to adapt
various features of the vehicle's systems to
the current driving situation, the desired driving
comfort and an economical driving style. Some
SEAT Drive Profiles Driving
of the systems that can be adapted are the
suspension, steering, engine and air condition-
ing.
Depending on the vehicle's equipment, various
drive profiles can be selected. The degree of in-
fluence of the vehicle's systems on the different
drive profiles depends on the vehicle's equip-
ment.
Engine
Depending on the profile selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed. When the Eco profile is
selected, the Start-stop function is activated.
In vehicles with automatic transmission, the
gear change timing is changed to put the
changes at higher or lower revolutions. The Eco
profile activates the Inertia function, thereby re-
ducing consumption. The rest of the driving pro-
files will activate the inertia use function when
the gear selector lever is not in the S position,
depending on how the accelerator pedal is re-
›››
leased page 169. When the vehicle is turned
on again, the function is activated by default to
reduce consumption.
With manual transmission, the ECO profile
changes the gear change recommendations to
facilitate more efficient driving.
Adaptive chassis control (DCC)
The DCC continuously adapts the damping of
the suspension system to the characteristics
of the road surface and the driving situation
(speed, acceleration and steering wheel angle)
according to the selected driving profile. In the
event of a fault in the DCC, the following mes-
sage is displayed on the instrument cluster dis-
play> Fault: damping adjustment.
Steering
The operation of the power steering is modified
and adapted to the selected profile to offer the
best behaviour for each situation.
Air conditioning
Climatronic can operate in Eco mode, espe-
cially restricting fuel consumption.
Adaptive Cruise Control (ACC)
Depending on the driving profile, the perform-
ance of the ACC to allow adaptation to a
speed that is more sporty or fuel consumption-
friendly.
Electronic Stability Control (ESC)
In the Offroad and Snow driving profiles, the
ESC adjusts to adapt to the characteristics of
the terrain.
PreCrash system
The PreCrash system adapts according to the
›››
selected configuration page 47.
173