Seat Tarraco 2022 Owner's Manual page 76

●
Charging cable for domestic power sock-
ets: The protection device performs a self-test
›››
page 80.
●
With the vehicle unlocked, the battery charg-
ing cover opens when it is pressed
●
Plug the charging connector into the charg-
ing socket. Check that the charging connector
is fully plugged in.
The connector locks automatically.
The LED (charging process display) on the
charging socket lights up
lamp lights up on the instrument cluster dis-
play.
You can set the charging as required in the info-
›››
tainment system page 77.
Automatic start of the charging process
If programmed charging is not activated, the
charging process starts immediately. The exter-
nal charging infrastructure must be active.
Most public charging stations require authenti-
cation to start the process. It is important to ver-
ify that the authentication has been performed
correctly, otherwise it could cause a system
malfunction.
During the charging
The indicator lamp flashes green on the in-
strument cluster.
74
The charging process indicator on the charging
socket flashes green
tor is locked.
If the charging process indicator lights up red,
›››
Fig. 55. there is a fault
Interrupt the charging process
The charging process can be interrupted:
●
Unlock the vehicle.
●
Press the immediate charge button
. The indicator
1 ›››
Fig. 59
locked.
●
Unlock the vehicle to unlock the charging
connector. The charging process can continue
by pressing the immediate charge button again
.
To restart the charging process just press the
function button to start the charging process.
After charging
When the high-voltage battery is fully charged,
the charging process display on the charging
socket lights up green.
●
Unlock the vehicle.
●
Unplug the charging connector from the
charging socket within 30 seconds.
●
Disconnect the charging cable from the
power supply and replace the protective cap.
●
Close the charging cover and make sure you
hear it click into place.
High-voltage battery
. The charging connec-
1
›››
page 74.
. The charging connector remains
1
First charge and charging after a long time
If the high-voltage battery is new or has
not been charged for a long time, the maxi-
mum charge level of the battery can only be
reached after several charging processes. This
is for technical reasons and is not a vehicle
malfunction.
If the vehicle is not used for a long period of
time, the high-voltage battery must be charged
at least once every four months.
Note
If you leave the charging cable connected
after charging, the vehicle's electrical con-
sumers will not drain the high-voltage bat-
tery.
Charging process display
Valid for: hybrid vehicles