Emergency starting function
Fig. 119
On the right of the steering column:
emergency start.
If no valid key is detected inside the vehicle,
an emergency start-up will be required. The rel-
evant message will appear in the dash panel
display. This may happen when, for example,
the vehicle key battery is very low.
●
Immediately after pushing the starter button,
keep the key next to the right trim of the steer-
›››
ing column
Fig. 119, as close as possible to
the Kessy logo.
●
The ignition connects and the engine starts
automatically.
Driving with electric drive
Driving
Indications for the driver on the in-
strument cluster screen
Depress the clutch
●
This indication is displayed on vehicles with
a manual gearbox when the driver does not
depress the clutch pedal when starting the en-
gine. The engine can only be started if the
clutch pedal is depressed.
Press the brake
●
This message appears on vehicles with an
automatic gearbox if the driver tries to start the
engine without having the brake pedal pressed.
Select N or P
●
This message appears if you try to start or
stop the engine when the selector lever of the
automatic gearbox is not in position P or N.
The engine can only be started and stopped
in those positions.
Engage position P; the vehicle can
move; doors can only be locked in
position P.
●
For safety reasons, this driver message ap-
pears and an audible warning sounds if the se-
lector lever of the automatic gearbox is not in
position P after you switch off the ignition. Move
the selector lever to the P position, otherwise
the vehicle could move.
Gear change: Selector lever in the
drive position!
●
This driver message is displayed when the
selector lever is not in the position P when the
driver door is opened. Additionally, a buzzing
sound is emitted. Put the selector lever in posi-
tion P, otherwise the vehicle could roll away.
Ignition is switched on
●
This driver message is displayed and a buz-
zer is sounded when the driver door is opened
with the ignition switched on.
Driving with electric drive
Switching on the hybrid drive system
✓ Valid for: hybrid vehicles
Switching on the hybrid drive activates the ve-
hicle's propulsion system. When the vehicle's
drive system is switched on, the electric drive
is activated. The combustion engine starts au-
tomatically when the charge level of the high-
voltage battery is not sufficient to run with the
electric drive, or if high drive power is required.
Requirements for switching on the drive sys-
tem
The drive system can be switched on when the
following conditions are met:
157