Note
● The wiper arms can be moved into the re-
placement position when the front bonnet is
fully closed.
● You can also use the service position, for
example, if you want to fix a cover over the
windscreen in the winter to keep it clear of
ice.
Changing the wiper rear wiper
blades
Fig. 220
Changing the windscreen wiper
blades
The windscreen wiper blades are supplied as
standard with a layer of graphite. This layer is
responsible for ensuring that the wipe is silent. If
the graphite layer is damaged, the noise of the
water as it is wiped across the windscreen will
be louder.
Changing the windscreen wiper blades
Miscellaneous situations
Check the condition of the wiper blades regu-
larly. If the wipers scrape across the glass,
they should be changed if they are damaged,
›››
or cleaned if they are dirty
If this does not produce the desired results,
the setting angle of the windscreen wiper arms
might be incorrect. They should be checked by
a specialised workshop and corrected if neces-
sary.
Damaged windscreen wiper blades should
be replaced immediately. These are available
from qualified workshops.
Raising and lowering windscreen wiper arms
●
Place the windscreen wipers in the service
›››
position
page 318.
●
Grip the wiper arms only by the blade's fas-
tening point.
Cleaning windscreen wiper blades
●
Raise the wiper arms.
●
Use a soft cloth to remove dust and dirt from
the windscreen wiper blades.
●
If the blades are very dirty, a sponge or damp
›››
cloth may be used
.
Changing the windscreen wiper blades
●
Lift and unfold the wiper arms.
●
Press and hold release button
and pull gently on the wiper blade in the direc-
tion of the arrow.
●
Fit a new wiper blade of the same length
and design on to the wiper arm and hook it into
place.
.
●
Rest the wiper arms back onto the wind-
screen.
Changing the rear window wiper blade
Fig. 221
Changing the rear wiper blade
●
Separate the wiper arm from the rear window.
●
Rotate the blade lightly
●
Hold down the release button
pulling the blade in the direction of arrow
●
Insert a new blade of the same length and
type in the rear wiper arm in the opposite direc-
tion to the arrow
place.
●
Fold the wiper arm and rest it on the window.
›››
Fig. 220
1
›››
Fig. 221
(arrow
).
A
while gently
1
.
B
until button
hooks into
B
1
319