Maximum Value; Diameter; Level Linearized - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Operating menu
User entry

Level linearized

Navigation
Description
Additional information

Maximum value

Navigation
Prerequisite
User entry

Diameter

Navigation
Prerequisite
User entry
Additional information
124
Up to 32 alphanumerical characters (letters, numbers, special characters)
 Setup → Advanced setup → Linearization → Level linearized
Displays linearized level.
The unit is defined by the Unit after linearization parameter →  122.
 Setup → Advanced setup → Linearization → Maximum value
Linearization type (→  121) has one of the following values:
• Linear
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
–50 000.0 to 50 000.0 %
 Setup → Advanced setup → Linearization → Diameter
Linearization type (→  121) has one of the following values:
• Horizontal cylinder
• Sphere
0 to 9 999.999 m
The unit is defined in the Distance unit parameter (→  101).
Levelflex FMP53 PROFIBUS PA
Endress+Hauser

