Backlight; Contrast Display - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Levelflex FMP53 PROFIBUS PA

Backlight

Navigation
Prerequisite
Description
Selection
Additional information

Contrast display

Navigation
Description
User entry
Factory setting
Additional information
Endress+Hauser
 Setup → Advanced setup → Display → Backlight
The device has the SD03 local display (with optical keys).
Switch the local display backlight on and off.
• Disable
• Enable
Meaning of the options
• Disable
Switches the backlight off.
• Enable
Switches the backlight on.
Regardless of the setting in this parameter the backlight may be automatically
switched off by the device if the supply voltage is too low.
 Setup → Advanced setup → Display → Contrast display
Adjust local display contrast setting to ambient conditions (e.g. lighting or reading angle).
20 to 80 %
Dependent on the display.
Setting the contrast via push-buttons:
• Darker: press the
• Brighter: press the
buttons simultaneously.
E
buttons simultaneously.
E
Operating menu
147