Incoming Acceptance And Product; Identification; Incoming Acceptance; Product Identification - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Incoming acceptance and product identification
14
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Check the following during incoming acceptance:
• Are the order codes on the delivery note and the product sticker identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• If required (see nameplate): are the Safety Instructions (XA) provided?
If one of these conditions is not met, please contact your Endress+Hauser sales office.
4.2

Product identification

The following options are available for the identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter the serial number from the nameplate in W@M Device Viewer
(www.endress.com/deviceviewer): all the information about the device is displayed.
• Enter the serial number on the nameplate into the Endress+Hauser Operations App or
scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser
Operations App: all the information about the measuring device is displayed.
Levelflex FMP53 PROFIBUS PA
Endress+Hauser