Configuration Backup Display; Operating Time; Last Backup; Configuration Management - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Operating menu

Operating time

Navigation
Description
Additional information

Last backup

Navigation
Description

Configuration management

Navigation
Description
Selection
148
"Configuration backup display" submenu
This submenu is only visible if a display module is connected to the device.
The configuration of the device can be saved to the display module at a certain point of
time (backup). The saved configurateion can be restored to the device if required, e.g. in
order to bring the device back into a defined state. The configuration can also be
transferred to a different device of the same type using the display module.
Navigation  Setup → Advanced setup → Conf.backup disp
 Setup → Advanced setup → Conf.backup disp → Operating time
Indicates how long the device has been in operation.
Maximum time
9 999 d ( ≈ 27 years)
 Setup → Advanced setup → Conf.backup disp → Last backup
Indicates when the last data backup was saved to the display module.
 Setup → Advanced setup → Conf.backup disp → Config. managem.
Select action for managing the device data in the display module.
• Cancel
• Execute backup
• Restore
• Duplicate
• Compare
• Clear backup data
Levelflex FMP53 PROFIBUS PA
Endress+Hauser
