Interface Linearized; Maximum Value; Diameter - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Operating menu

Interface linearized

Navigation
Prerequisite
Description
Additional information

Maximum value

Navigation
Prerequisite
Description
User entry
Factory setting

Diameter

Navigation
Prerequisite
Description
User entry
Factory setting
Additional information
154
 Setup → Advanced setup → Linearization → Interface linearized
Operating mode (→  128) = Interface or Interface with capacitance
Displays the linearized interface height.
The unit is defined in the Unit after linearization parameter →  152.
 Setup → Advanced setup → Linearization → Maximum value
Linearization type (→  151) has one of the following values:
• Linear
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
Linearized value corresponding to a level of 100%.
–50 000.0 to 50 000.0 %
100.0 %
 Setup → Advanced setup → Linearization → Diameter
Linearization type (→  151) has one of the following values:
• Horizontal cylinder
• Sphere
Diameter of the cylindrical or spherical tank.
0 to 9 999.999 m
2 m
The unit is defined in the Distance unit parameter (→  128).
Levelflex FMP55 HART


Endress+Hauser